40w Integrated Solar Street Light
Combined with the most advanced green energy today, the 40w integrated led solar lamp street light uses the practical control technologies of micro-controller and infrared human detective light, which are mixed into the simplified integrated structure, to reach the goal of low consumption, high brightness, long service time and maintenance-free, and the performance of water-proofing and heat radiation are pretty good. The solar panel one it absorbs solar energy, which is transformed into electric energy, in daytime, and give out strong light through leds at night.
|Solar panel Max power:||18V60W (high efficiency imported Monocrystalline silicon )||Sensor distance||8-12m|
|Solar panel Life time:||25 years||Lamps material of main:||aluminium alloy|
|Battery Type:||lithium battery 12V 27AH||Certificate:||ISO/CE / ROHS / IP65|
|LED Max power:||12.V 40W||Warranty period:||3years|
|Led chip brand:||Bridgelux from USA with high brightness||Mounting height(m):||7m|
|Lumen (LM):||110-120lm/w||Space between light(m):||20-25m|
|LED Life time:||50000hours||Inner box:||/|
|Lighting Viewing Angle:||65°x 120°(bar wing street light distribution )||N.W||12.9KG|
|Charge time(by sun):||6-7hours (with enough strong shine)||Unit size||1136*295*44mm|
|Working TEMP( °C )||-25~+65°C||carton size||1190*360*220mm|
|Charge / Storage||0 - 45°C||Q'ty/ctn:||1sets/ctn|
|CCT (k):||6500k-7000k||GW.for carton:||15.2KG|
|20GP container:||290pcs||40GP container:||690pcs|
1. Intelligent human body detector system
The intelligent human body detector system has infrared sensor, and when people get closer to it, it will give out full light, however, when people leave away, the brightness will cut down to 1/3, which can save energy effectively.
The Li-battery with high capacity and long using time is applied, and the using time can be 8 years.
3. Integrated design
Integrated design without stay wire, easy installation, low cost in transportation, several installation methods are provided, and the lamp post can be local materials, such as the iron post, wood, bamboo, plastics and so on.
4. Maintenance-free accumulator
The all in one solar lamp street light can work in the temperature of -40°C to 60°C, and the battery active can reach 80%. The overcharge and over-discharge protection can give full protect to the accumulator, and the working time can reach 5 years.
Problems should be Notice in the installation and using of the integrated solar street light
1.Integrated solar street light could not work without sunshine, please select the suitable model according to the local sunshine radiation and the annual total radiation. We suggest use the both AC and DC charging model in those places where lack of sunshine or have long-time rainy days.
2. Integrated solar street light adopts the long life Lithium battery for storing energy, charging temperature at day time is between: 0°C~+60°C, when temperature goes lower than 0°C, the control system will stop automatically to protect the battery, and it will revive to charge the battery while temperature goes higher than 0°C. Discharging temperature at night is between: -20°C~+60°C, any ambient beyond will take damage to the battery. So please check these factors while selecting the street light.
3.Battery of the integrated solar street light can be stored for 6 months long after fully charged. Therefore please examine and charge it periodically after long time transportation or storage to prevent damaging.
4.When install the lights in Northern Hemisphere, please adjust the solar panel to the South as much as possible to collect maximum sunshine radiation, while install them in Southern Hemisphere, By the same token, keep solar panel to north. At the same time please keep it away form any shadow of houses, trees etc.
5.Keep clear of the surface of the integrated solar street light with normal detergent to get maximum power generation, clear the dust or tree leaves or any grease.
6.Integrated solar street light have got the standard of IP65. The vents on the surface is designed for radiating. The materials are made of aluminum alloy which can survive in the environment of seaside and desert.
7.The knob of the fuse is at the left rear end of the light, please insert the fuse while using. By the way, there is one piece of fuse more as backup (If not fuse, then it is switch, just turn the switch).